EPAuto 12V Portable Air Compressor Pump Reviews
Today, we will explanation about EPAuto Portable Air Compressor Pump reviews for you. What’s nice is the scarf it’s 95 here reviewing EPR O’s portable air compressor or tire inflator. This little tiny air compressor is meant to pump up your small cars tires and keep your spare tire properly inflated. this tool you can use as car care tips that you can do yourself at home.
What it’s not meant to do is pump up any large cars like trucks in anything bigger. It’s also not meant to be used for long periods of time in fact. It also warns you to not run it for longer than 10 minutes. You should let it rest for a little bit after 10 minutes before running it again to prevent any overheating issues. Inspired using your car’s auxiliary power outlet and draws the in power at 120 watts requires 12 volt has a maximum pumping pressure of 100 psi with an inflation rate of 1.06 cubic feet per minute.
Read also : 6 Accessories That Make Your Car Look More Cool
The inflation tube is not just plastic like others in the price range but rather a slightly reinforced and also wrapped around neatly around the body which is really nice and on the bottom it has four little rubber feet. You wouldn’t scratch any surface that you put it on.
The power cord has AP opens few so that’s a very good safety feature. The length of the cable is approximately 8 to 9 feet long which was sufficient for my uses and it should be no problem for you to reach all the way to your rear wheel.
This compressor also throws in a few extra stuff it has an extra fuse to cone adapters as well as a ball pump adapter. Now, we’re going to walk you through how to use this air compressor? It’s very easy to do but make sure you give the instruction manual quick read before you do this. The very first thing you absolutely have to do is make sure that the pump is off when you insert it.
And then, remove the valve cap from the tire that you want to pump up and go ahead and attach the compressor to and make sure to screw it on tightly. Firstly, you will fear a little air leakage but make sure that that sound goes away to ensure that you have a good feel.
Once the compressor tube is probably connected to the valve, you can go ahead and turn on your engines not just to on but actually start your engine. And then, plug in the power cord to the Cars auxiliary power. at this point, you should see that the LED on the air compressor is on, I couldn’t find a way to turn it off if I didn’t want it on but it’s really not that big of a deal.
The LCD should be on in showing a number. You can use the middle button to switch between the units. By default, it shows psi but you can also have it in bar as well as kilopascals and kilograms per cubic centimeter.
Normally, for us cause you will want to read it in terms of psi and to know how much your tire needs to be pumped up to the specifications should be on the door of your car right here on the driver’s side in this case I need to pump it up to 32 psi.
None of the tires right now are deflated but the rear tire here is just a little bit under that amount. You know that you’re setting the pressure and not just reading the actual pressure currently in the tire when the number is blinking on the screen. Once you have the numbers set now is when you turn on.
Read also : Tips to Take Care Of Turbocharged Cars
This is short EPAuto Portable Air Compressor Pump reviews for you, hopefully you can understand about it for your benefit.